SITEMANAGER ACCESSORIES

All our Secomea compatible accessories are listed below

ANTENNAS ADDONS

ANTENNAS

3G/4G Omni antenna for mounting on a wall
P/N 26959

5 dBi gain. 8-meter cable with SMA Male (RF-SMA Male) connector for connecting to SiteManager xx39 models.
See SMA connector info.

Download datasheet

3G/4G Puck antenna for mounting on a flat surface
P/N 26919

3 dBi gain. Seals the mounting hole. 2.5 meter cable with SMA Male (RF-SMA Male) connector for connecting to SiteManager xx39 models.

Download datasheet

3G/4G Surface antenna for mounting on a flat surface
P/N 26962

3 dBi gain. Seals the mounting hole. 5 meter cable with SMA Male (RF-SMA Male) connector for connecting to SiteManager xx39 models.

Download datasheet

3G/4G Mini antenna with magnetic foot
P/N 26920

2dBi gain. 2,5 meter cable with SMA Male (RF-SMA Male) connector for connecting to SiteManager xx39 models.

Download datasheet

Extension cable
P/N 27102

5 meter cable for antennas: Omni (P/N 26959), Puck (P/N 26919) and Surface (P/N 26961).

Download datasheet

WiFi Puck antenna for mounting on flat surface
P/N 27114

3 dBi peak gain 2 meter cable with RP-SMA Male connector (fits WiFi adapter Secomea P/N 27250) Dimensions: 102 x 33.5mm (dxh) Frequency range 2..4-2.5 / 4.9-5.8 GHz

Download datasheet

SMA Connector LTE USB Modem
P/N 27036

27036: 200mm SMA connector for Alcatel LTE USB Model: LTE USB modem EU (P/N 27054), LTE USB modem US (P/N 27055), LTE USB modem US (P/N 27056).

Download datasheet

Secomea WiFi USB Adapter with SMA connector for SiteManager
P/N 27251

Connects your SiteManager to a factory access point, or turns your SiteManager into an Access Point.

The WiFi USB adapter is compatible with the following SiteManager models: 1129/1139/1529/1539/3329/3339/3529/3539 (Note that the SiteManager must run firmware version 9.6 or newer).

Specifications:

Frequency supported: 2.4GHz
Standard: IEEE 802.11n (draft 2.0), IEEE 802.11g, IEEE 802.11b
Omni-directional antenna included (RP-SMA Male)
RP-SMA Female connector for connecting third party antennas
Operating temperature: 0 – 40 C
Operating humidity: 10% – 90% non-condensing
WPA modes: WPA/TKIP, WPA2/AES-CCMP

Note: When installed and configured in the SiteManager, the WiFi USB adapter will represent Uplink2, i.e. if installed in a model with integrated 4G (xx39 models), the WiFi USB adapter will take precedence. Also, note that only the Secomea provided WiFi USB Adapter is supported. No other WiFi adapters will work.

Download Initial Contact Guide